ReferenceDesignLibrary

Refine Search

Eval Board Voltage In Sensing Method Current Sensing Max Features Quiescent Current [Maximum] Quiescent Current [Typical] Component Count + Extras Design Author
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (3)

3 Results - Page 1/1

ZXCT1008EV1: HS Current Monitor, 0.5A, 2A, 2.5A

Manufacturer: Diodes Incorporated

The ZXCT1008EV1 is a current monitor evaluation board which measures 0.5A, 2.0A or a 2.5A load current. This current is then translated to a proportional output current which is scaled by an external resistor to give a 2.5V full scale output voltage.

The board has also been designed to incorporate protection from 110V transients and includes and additional current limiting resistor. …

View Design

STEVAL-ISQ013V1: Low-Side Current Sense

Manufacturer: STMicroelectronics

This application note describes the STEVAL-ISQ013V1, a demonstration board specifically designed for low-side current sensing with the TS507 operational amplifier.

Power management mechanisms are found in most electronic systems. Current sensing is useful for protecting your applications. The low-side current sensing method consists in placing a sense resistor between the load and th…

View Design

TIPD135: 10μA ~ 100mA, 0.05%, ±15V, Shunt Sense

Manufacturer: Texas Instruments

This split-supply, high-side current sensing solution accurately detects load currents from 10 μA to 100 mA. The linear range of the differential voltage output is from -4.9V to +4.9 V. An instrumentation amplifier with pin-programmable gain was selected in order to measure the four-decade load current range.

View Design
3 Results - Page 1/1