The best tools to make your project dreams come true

Login or Signup

This week on Maker Update, adding nuance to your LED projects, Teensy 4.0, machine learning for knitting, hello drinkbot, AI wearables, and toy hacking.

VIDEO

Light Theremin - The rapid switching on and off of this “astable oscillator circuit” generates sound — buzzes and tones of different frequencies.

PROJECT

What can you make with an Arduino and RFID? A lot, actually.

PROJECT

Welcome to the 2019 Guide to Boards!

AR ENABLED

Is it the end of an era or the start to new beginnings?

BLOG

Use an Arduino to read temperature, humidity, and pressure data from a BME280 and send it over a simple LoRa connection to a Raspberry Pi server.

PROJECT

One of the final steps of any IoT project is being able to retrieve information from the cloud. In this guide we will, get cloud data and perform other tasks.

BLOG

Shawn Hymel completes the LoRa Radio project by disabling brown out detection and calculating the number of WDT (watch dog timer) cycles needed the achieve the desired one year of project battery life running on two AAA alkaline cells.

VIDEO

We build on our previous LoRa IoT weather sensor to run for a year on 2x AAA batteries. We'll look at the AVR ATmega328p datasheet to determine which registers we need to use to put the microcontroller to sleep, and we'll calculate how long we need to sleep before sampling the sensor again.

PROJECT

Kickstart and Innovate your blinds control design As pictures tell more than long explanations, let me start with some screenshots as below jpg’s from our IoT Studio to get familiar with this Trinamic/AVR IoT Project: Trinamic’s TMC5161 + Microchip’s AVR-IoT WG + Digi-Key’s IoT Studio Template

PROJECT

Seeed Technology presents their Sipeed MAIX Bit, which is a breadboard-friendly, purpose-built module designed to run AI at the edge.

VIDEO