ReferenceDesignLibrary

Refine Search

Eval Board Application / Target Market Voltage Out Voltage In Topology Voltage Out Range Efficiency @ Conditions Current Out Current In Features Design Author
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (5)

5 Results - Page 1/1

ADP5091-1-EVALZ: 3.5V @ 150mA, 0.38 ~ 3.3 Vin, Boost

Manufacturer: Analog Devices Inc.

The ADP5091/ADP5092 is a 2-channel ultralow power energy harvesting PMU in a compact 4 mm × 4 mm LFCSP package.

View Design

STEVAL-ISV013V1: 350 ~ 450V @ 800mA, 10 ~ 55V in

Manufacturer: STMicroelectronics

The STEVAL-ISV013V1 is a fully integrated module designed for a smart junction box in distributed photovoltaic architecture. The module represents an easy-to-use, fully-protected solution to implement precise photovoltaic panel control, diagnostic and protection.

The STEVAL-ISV013V1 is the base element for a new photovoltaic panel configuration able to increase the panel energy produ…

View Design

DC1582B-B(#2): 50 ~ 400mV in, 2.5 ~ 4.5V Out

Manufacturer: Linear Technology/Analog Devices

Demonstration Circuit 1582B featuring the LTC3108 is a highly integrated DC/DC converter optimized for harvesting and managing energy from extremely low input voltage sources such as thermoelectric generators (TEG). The step-up topology operates from input voltages as low as 20mV.

The DC 1582B Demonstration Circuit has been optimized for low start-up voltage with a 100:1 turns ratio …

View Design

MAX17710EVKIT#(3): Thin Film Batt Energy Harvesting Charger

Manufacturer: Maxim Integrated

The MAX17710 evaluation kit (EV kit) is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX17710 energy-harvesting charger and protector. The EV kit features the THINERGYM micro-energy cell (MEC) from Infinite Power Solutions, Inc. (IPS), a solid-state, rechargeable, thin-power solution. Solar cells are installed on the EV kit as the …

View Design

ADP5090-1-EVALZ(#2): 3.5V @ 800mA, 0.8 ~ 3.3V in

Manufacturer: Analog Devices Inc.

The ADP5090 is an ultralow, power synchronous, dc-to-dc boost regulator in a compact 3 mm × 3 mm LFCSP_WQ package. The ADP5090 runs from input voltages of 0.38 V to 3.3 V and requires minimal external components to provide a high efficiency solution with an integrated power switch, a synchronous rectifier, and battery management.

The EVAL-ADP5090 evaluation board provides an easy way…

View Design
5 Results - Page 1/1