Design contains obsolete parts

TPS62601EVM-327: 1.8V @ 500mA, 2.3 ~ 5.5 Vin

Summary

This EVM demonstrates the Texas Instruments TPS62601, 6-MHz, synchronous, step-down converters capable of providing up to 500 mA of output current.

This document includes setup instructions, a schematic diagram, a bill of materials, and printed-circuit board layout drawings for the EVM.

Specifications

Manufacturer Texas Instruments
Category AC/DC and DC/DC Conversion
Sub-Category DC/DC SMPS - Single Output
Eval Board Normally In Stock
Topology Step Down
Outputs and Type 1 Non-Isolated
Voltage Out: Factory Set 1.8 V
Current Out 500 mA
Voltage In 2.3 ~ 5.5 V
Efficiency @ Conditions - Not Given
Voltage Out Range - Not Given
Features Current Limit (Adj. or Fixed)
Light Load Mode
Short Circuit Protection
Shutdown, Enable, Standby
Soft Start
Thermal Protection
Under Voltage Protection, Brown-Out
Switching Frequency 6 MHz
Standby Current [Typical] 200 nA
Quiescent Current [Typical] 30 mA
Component Count + Extras 4 + 6
Internal Switch Yes
Design Author Texas Instruments
Application / Target Market Cell Phones
Computers
Point of Load (PoL)
Portable Devices
RF / Wireless
Standby Current [Maximum] 1 µA
Quiescent Current [Maximum] 45 mA
Main I.C. Base Part TPS62601
Date Created By Author
Date Added To Library 2011-03

Support Documents & Media

TPS62601EVM-327 - User Guide TPS62600/001 - Datasheet Ultra Librarian Software:CAD Symbols and Footprints (Zip File) TI's CAD/CAE Symbols and Footprint Search

Media

TPS62601EVM_327_Schematic.JPG