ReferenceDesignLibrary

Find Designs, Fast

About Reference Design Library

Instead of searching many manufacturer sites or calling on companies to find and compare designs, now you can search for designs based on the circuit’s performance using Digi-Key’s Reference Design Library.

The Reference Design Library was created in order to:

  • Save Engineers time
  • Deliver ideas, fast
  • Sift through designs based on performance
  • Provide designs conveniently accompanied by their schematics

Visit often as new designs are being added weekly and improvements will be made based on your constructive feedback.

Newest Designs

STEVAL-3DP001V1: 6 Axis 3D Printer Control Board

Manufacturer: STMicroelectronics

The STEVAL-3DP001V1 is a complete and integrated solution for driving all 3D printers on the market, including Delta models requiring more complex computation. The solution is ideal for both beginners and experienced users. It is autonomous and can be used with a software interface or with custom firmware thanks to the embedded STM32 microcontroller based on the ARM 32-bit Cortex M4 core.

View Design

STEVAL-IHM023V3: 1 kW 3-Phase Motor Driver 90 ~ 285VAC, 125 ~ 400VDC

Manufacturer: STMicroelectronics

The STEVAL-IHM023V3 evaluation board implements a 1 kW three-phase motor control application featuring L6390 high and low-side driver and the STGP10H60DF IGBT. The evaluation board is an AC-DC inverter that generates a three-phase waveform for driving two- or three-phase motors such as induction motors or PMSM motors up to 1000 W, with or without sensors.

View Design

LC231X: USB 2.0 to UART Bridge

Manufacturer: FTDI, Future Technology Devices International Ltd

The LC231X module is a low cost USB to UART bridge using FTDI’s FT231X to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc.. It also provides the pinout which follows the industry standard FTDI TTL cable interface. The module provides the UART interface with full modem handshaking control too.

View Design