Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

LP5912Q3.3DRVRQ1 IC REG LINEAR 3.3V 500MA 6WSON Texas Instruments	6,792 In Stock	1 : £0.96000 Cut Tape (CT) 3,000 : £0.46283 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6.5V	3.3V	-	0.18V @ 500mA	500mA	55 µA	600 µA	80dB ~ 40dB (100Hz ~ 100kHz)	Enable, Power Good, Soft Start	Over Temperature, Reverse Polarity, Short Circuit	-40°C ~ 125°C (TJ)	Automotive	AEC-Q100	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)
LT3045EDD#PBF IC REG LIN POS PROG 500MA 10DFN Analog Devices Inc.	102 In Stock	121 : £3.61545 Tube	-	Tube	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	-	-	Surface Mount	10-WFDFN Exposed Pad	10-DFN (3x3)
LT3045EMSE#TRPBF IC REG LIN POS PROG 500MA 12MSOP Analog Devices Inc.	7,593 In Stock	1 : £7.79000 Cut Tape (CT) 2,500 : £3.33588 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	-	-	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.