25.4V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Applied FiltersRemove All

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package
XC6216C202MR-G IC REG LIN POS ADJ 100MA SOT25 Torex Semiconductor Ltd	8,096 In Stock	1 : £1.28000 Cut Tape (CT) 3,000 : £0.35752 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	28V	2V	25.4V	2.6V @ 100mA	100mA	9 µA	-	30dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-25-5
XC6216C202PR-G IC REG LIN POS ADJ 100MA SOT89-5 Torex Semiconductor Ltd	2,546 In Stock	1 : £1.35000 Cut Tape (CT) 1,000 : £0.42411 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	28V	2V	25.4V	2.6V @ 100mA	100mA	9 µA	-	30dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SOT-89-5/6	SOT-89-5
LM2931D IC REG LIN POS ADJ 100MA 8SOIC STMicroelectronics	0 In Stock	2,000 : £0.32087 Tube	-	Tube	Obsolete	Positive	Adjustable	1	26V	2.5V	25.4V	0.6V @ 100mA	100mA	1 mA	30 mA	80dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C (TJ)	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SOIC
LM2931D-R IC REG LIN POS ADJ 100MA 8SOIC STMicroelectronics	0 In Stock	1 : £0.61000 Cut Tape (CT) 2,500 : £0.28568 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	Positive	Adjustable	1	26V	2.5V	25.4V	0.6V @ 100mA	100mA	1 mA	30 mA	80dB (120Hz)	-	Current Limit, Thermal Shutdown	-40°C ~ 125°C (TJ)	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SOIC

Showing

of 4

25.4V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.