Common Mode Chokes

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Filter Type	Number of Lines	Impedance @ Frequency	Inductance @ Frequency	Current Rating (Max)	DC Resistance (DCR) (Max)	Voltage Rating - DC	Voltage Rating - AC	Operating Temperature	Ratings	Approval Agency	Features	Mounting Type	Size / Dimension	Height (Max)	Package / Case
CC2824E513R-10 CMC 51UH 800MA 2LN 3.8 KOHM SMD Laird-Signal Integrity Products	2,978 In Stock	1 : £3.02000 Cut Tape (CT) 1,500 : £1.64289 Tape & Reel (TR)	CC2824	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	3.8 kOhms @ 50 MHz	51 µH @ 100 kHz	800mA	300mOhm	80V	42V	-40°C ~ 125°C	-	-	-	Surface Mount	0.295" L x 0.217" W (7.50mm x 5.50mm)	0.150" (3.80mm)	Horizontal, 4 Flat Lead
CC2824J502R-10 CMC 5UH 1.2A 2LN 400 OHM SMD Laird-Signal Integrity Products	8,169 In Stock	1 : £4.89000 Cut Tape (CT) 1,500 : £2.80957 Tape & Reel (TR)	CC2824	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	400 Ohms @ 500 MHz	5 µH @ 100 kHz	1.2A	100mOhm	80V	42V	-40°C ~ 125°C	-	-	-	Surface Mount	0.295" L x 0.217" W (7.50mm x 5.50mm)	0.150" (3.80mm)	Horizontal, 4 Flat Lead
CC2824B475R-10 CMC 4.7MH 400MA 2LN 12.3KOHM SMD Laird-Signal Integrity Products	3,148 In Stock	1 : £4.89000 Cut Tape (CT) 1,500 : £2.80957 Tape & Reel (TR)	CC2824	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	12.3 kOhms @ 2 MHz	4.7 mH @ 10 kHz	400mA	0.55Ohm (Typ)	80V	42V	-40°C ~ 125°C	-	-	-	Surface Mount	0.295" L x 0.217" W (7.50mm x 5.50mm)	0.150" (3.80mm)	Horizontal, 4 Flat Lead

Showing

of 3

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.