AC DC Converters, Offline Switchers

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Isolation	Internal Switch(s)	Voltage - Breakdown	Topology	Voltage - Start Up	Voltage - Supply (Vcc/Vdd)	Duty Cycle	Frequency - Switching	Power (Watts)	Fault Protection	Control Features	Operating Temperature	Package / Case	Supplier Device Package	Mounting Type
ICE5QSBGXUMA1 IC OFFLINE SWITCH FLYBACK 8DSO Infineon Technologies	3,159 In Stock	1 : £1.05000 Cut Tape (CT) 2,500 : £0.51183 Tape & Reel (TR)	CoolMOS™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Isolated	No	-	Flyback	16 V	10V ~ 27V	-	-	109 W	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage	-	-40°C ~ 125°C (TJ)	8-SOIC (0.154", 3.90mm Width)	PG-DSO-8	Surface Mount
ICE3B0365JG IC OFFLINE SWITCH FLYBACK 12DSO Infineon Technologies	2,979 Marketplace	547 : £0.43890 Bulk	CoolMOS™	Bulk	Active	Isolated	Yes	650V	Flyback	-	10.3V ~ 26V	75%	67kHz	-	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage	Soft Start	-25°C ~ 130°C (TJ)	12-BSOP (0.295", 7.50mm Width) Exposed Pad	PG-DSO-12	Surface Mount
ICE5QR2280AZXKLA1 IC OFFLINE SWITCH FLYBACK 7DIP Infineon Technologies	0 In Stock	2,000 : £1.02239 Tube	CoolMOS™	Tube	Obsolete	Isolated	Yes	800V	Flyback	16 V	10V ~ 27V	-	-	41 W	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage	-	-40°C ~ 125°C (TJ)	8-DIP (0.300", 7.62mm), 7 Leads	PG-DIP-7	Through Hole
ICE5QR2270AZXKLA1 IC OFFLINE SWITCH FLYBACK 7DIP Infineon Technologies	0 In Stock	2,000 : £1.04199 Tube	CoolMOS™	Tube	Obsolete	Isolated	Yes	700V	Flyback	16 V	10V ~ 27V	-	-	41 W	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage	-	-40°C ~ 125°C (TJ)	8-DIP (0.300", 7.62mm), 7 Leads	PG-DIP-7	Through Hole

Showing

of 4

Products in this family are component-level control devices used to construct equipment that converts AC utility power to a DC form, typically at a much reduced voltage. Devices which incorporate the primary switching element for the system and those which do not are both included. Due to the high ratio of input to output voltages and need for isolation commonly encountered in such systems, they are often used in conjunction with an external transformer. While use of custom transformers for this purpose is common practice, a variety of stock products intended for such use are available, under the heading of Switching Converter, SMPS Transformers.