CML Microcircuits' CMX901 and CMX902 broadband RF power amps are ideal for small form-factor applications such as handheld radio terminals and data modules.
Diodes' PI4ULS5V106 has bidirectional voltage translation without the need for DIR pin which minimizes system effort.
CML Microcircuits' CMX655D low-power voice codec offers significant reduction in power consumption that is ideal for always-on operation in voice control.
Amphenol ICC's new Griplet connector offers a robust solution for miniature IDC wire to board connections. The low profile and compact design makes Griplet an ideal connector where space is tight and ease of installation is important.
Amphenol ICC’s Minitek 1.50 mm connectors are designed with a positive locking system and audible click for secure mating retention.
C&K's sub-miniature PTS815 tact switch is designed for home automation and Internet of Things (IoT) electronic devices.
Zeus Battery Products’ alkaline manganese dioxide batteries have excellent leakage resistance due to advanced seal technology.
IDT's XA series of automotive oscillators are precision crystal oscillators with 750 fs to 890 fs typical phase jitter over 12 kHz to 20 MHz bandwidth.
Cypress Semiconductor's EZ-BT™ WICED® module is a dual-mode Bluetooth® BR/EDR and Low Energy (BLE) wireless module solution ideal for IoT applications.
CTS' series 285 is a non-contacting rotary position sensor for applications that may encounter harsh environments.
Susumu's RGT series metal thin-film chip resistors are ideal for applications that require high temperature such as automotive, aerospace, and industrial.
MaxLinear’s XR77103-A1R0 and XR77103-A0R5 regulators can operate in 5 V, 9 V, and 12 V systems and have integrated power switches.
Delta's frameless fans series is available in blower, mixed-flow, and axial models that work well for space-constrained and noise-sensitive applications.
ZEUS' SLA batteries are available in a wide range of shapes and sizes, making them a common product for a wide variety of applications.
The Khadas tone board is an external USB hi-fi sound card that integrates the multi-core RISC microcontroller and ESS flagship audio DAC into a tiny PCB.
Diodes’ 4-channel PI3EQX16904GL linear ReDriver™ boosts the signal quality of high-speed PCIe® 4.0 interfaces.
CUI’s waterproof DC power jack connectors carry ratings of IP67 to deal with the harsh conditions found in industrial and outdoor applications.
Cypress Semiconductor's EZ-BT™ XR WICED® module is a dual-mode Bluetooth® BR/EDR and BLE wireless module solution.
The Bourns® model SM8S-Q for surge and ESD protection applications are available in a compact chip package DO-218 size format.
Makeblock’s Codey Rocky is a powerful entry-level coding robot that includes a variety of built-in programmable components.
Wurth Electronics' card connectors are used in applications requiring identification modules and using pluggable non-volatile memory and compact flash (CF).
Cypress' PSoC 63 BLE 5.0 module is a programmable turnkey solution for developers wanting to easily add Bluetooth connectivity to their IoT design.
Cypress Semiconductor's EZ-BT™ WICED Module is a dual-mode Bluetooth BR/EDR and Low Energy (BLE) wireless module solution ideal for a range of IoT applications.
C&K's FDSD and FDSE series of micro-mini, side-actuated detect switches are suitable for applications that require vertical side detection.
Davies Molding’s thermoset rubber ball knobs offer a tactile feel and low heat generation to allow for a comfortable grip.
1551V miniature ventilated sensor enclosures from Hammond Manufacturing are designed to house sensors and small sub-systems installed in IoT systems.
Littelfuse's SP4203 integrates low-capacitance diodes to provide electronic equipment protection from destructive electrostatic discharges (ESD).
Weidmuller's RockStar® heavy-duty connectors offer a secure, simple, and time-saving solution for the assembly of machinery and facilities.
Sensata Technologies offers a variety of products including sensors, switches & more to help provide solutions for your commercial beverage needs.Publish Date: 2019-04-17
ASSMANN WSW Components offers a variety of USB connectors to fulfill the design requirements of customers.
Molex's fully shielded DisplayPort cables offering reliability, durability, and 4K display resolution are ideal for a variety of markets and applications.
The API Delevan HRSPD127 series of fixed inductors has magnetic shielding, low DRC, and excellent handling capabilities for high-reliability applications.
C&K's KSC-DCT is a unique combination of a compact form factor (6.2 mm x 6.2 mm x 5.2 mm) SMT soft actuator tact switch with the SPDT function.
Critical Link's MitySOM-A10S is an Intel®/Altera Arria® 10 SoC system on module (SOM) developed exclusively for industrial applications.
Littelfuse's SPD2 series of surge protection devices (SPDs) are designed for equipment protection from transient overvoltage events.
SL Power’s LU225 product family offers a next-generation, feature-rich design and delivers 225 W of AC/DC power.
Stewart Connector’s SealJack™ provides a USB 2.0 connection for products that need to be outside a typical office environment.
RAFI's RAMO series mono constructed industrial controls provides highly economical and easy-to-install alternatives to traditional 22 mm and 30 mm product.
Maxim's MAX22513 dual-channel low power IO-Link device transceiver boasts selectable control interface, internal regulators, and integrated surge protection.
Littelfuse’s HEV series of high voltage power fuses are designed for use in the hybrid and electric vehicles and in industrial circuits.
Bourns® dual-channel TBU® HSPs protect against faults caused by short circuits, overvoltage transients, and faults in battery cells up to rated limits.
Maxim's MAX77860 USB Type-C switch-mode buck charger is ideal for portable devices such as smartphones and IoT devices.
Infineon’s new line of high performance voltages regulators are designed to offer an increase in power efficiency & robustness for all your automotive applications.
ASSMANN WSW Components' USB cables are available in 2 m, 30 m, and 5 m lengths and between series, standard, and extension configurations.
Rigado’s BMD-330 provides a complete RF solution allowing faster time-to-market with reduced development cost and provides full use of the nRF52810.
Check out Advanced Thermal Solutions wide array of heat sinks including the largest selection of pushPIN™ heat sinks on the market to cover your board.Publish Date: 2019-04-16
Molex’s range of pre-crimped leads offers a simple and cost-effective solution for any pre-production and prototype requirements.Publish Date: 2016-02-04 Updated: 2019-04-15
Wurth Electronics' WE-HCFT series features up to 200% higher current capability than the WE-HCF 2815 series.
IDT’s 5P49V60 programmable clock generator can be configured to use one of two I2C addresses to allow multiple devices to be used in a system.
CUI's AMT10 and AMT11 series are rugged, high-accuracy incremental encoders with capacitive sensing technology and are not susceptible to dirt, dust, and oil.
MKJ series receptacle come in many mounting options for both crimp and PCB contacts including in-line, jam nut, front mount, square flange mount, and flange mount.
MPD's BH123A battery holder is flush with the PCB's surface, which adds no height to a CR123A cell when mounted on a printed circuit board.
MCC expands their offering of power and small signal MOSFETs, focusing mainly on surface mount packages.
Digi International's AnywhereUSB® Plus remote USB hubs provide users the simplest connection options using a variety of USB 3.1 Gen 1 port options.
Bourns® SF-3812TL-T series SinglFuse™ SMD fuses have a ceramic tube wire-in-air design for time-lag fusing speed and low-power applications.
The SCS resistance pro meter is an instrument designed to measure resistance point-to-point (Rtt) or surface-to-ground (Rtg).
Molex off-the-shelf mini-lock discrete wire cable assemblies provide ease of design, prototyping, and production making them well-suited for many applications.
American Bright’s ezyLED™ series are LEDs connected in parallel and directly driven by a conventional 12 V/24 VDC source.
KEMET's SBT, SH, and SHO series DC line filters are ideal for audio-visual equipment, office automation equipment, digital appliances, and power supplies.
PIC GmbH's level sensor incorporates reed switches in a stem combined with a float that provides reliable liquid level sensing.
Insight SiP's ISP1507-AL Bluetooth® 4.2+ module offers a miniature SiP format and is based on Nordic Semi's nRF52810 chipset.
American Bright's LED light strips are available in variable lengths and colors and can be customized to specific requirements.
TE Connectivity (TE) AMP's LUMAWISE Z45 LED holder adds to its broad offering of LED holders for chip-on-board (COB) LEDs.
Tensility’s M5 cable assemblies with biocompatible TPU wire and IP67 waterproof rating are available in 3- and 4-pin configurations.
Jauch lithium polymer batteries are available in a wide selection, offering many options for different stages in the project.
The Ideal-tek high precision tweezer line has been expanded with the addition of their biology line to meet the most stringent applications.
Nidec Copal Electronics' M series wirewound potentiometers are available with three, five, or ten turns and utilize precision wire-winding technology.
Heavy-duty connectors (HDC) from TE Connectivity (TE) have excellent and reliable performance in harsh environments.
Weidmüller has many different products to meet various industrial ethernet connectivity requirements.
Molex’s QSFP-DD interconnect system enables face-plate density equal to the current 2x1 QSFP form factor but with 8-lane ports.
Bourns® SC series miniature resettable thermal cutoff (TCO) devices are available in two heights and can be used with multiple applications.
Jauch lithium-ion batteries can last several years, depending on the use and storage conditions.
Bourns' CRK series metal strip wide terminal resistors are ideal for current sensing in consumer and telecom electronics and industrial automation applications.
Broadcom's automotive isolation amplifiers designed for high-precision DC voltage sensing operate with a full span of analog input voltages up to 2.46 V.
Diodes’ differential channel bidirectional crossbar switch solution is designed for switching USB 3.1 Gen1/Gen2 and HDMI 2.0 signals through USB-CTM connector.
Cypress Semiconductor's single-chip solution is targeted at Bluetooth Mesh, audio, voice, wearables, HID, home automation, and other IoT applications.
TDK’s TFM-ALVA series thin-film power inductors feature high withstand voltage (40 V) for ADAS applications.
TDK’s CA series mega cap stacks up to three MLCCs horizontally, offering higher capacitance in a single component.
PIC GmbH’s reed sensors with reed switches, firmly potted into a metal- or plastic housing, provide excellent mechanical protection and easy assembly.
Panasonic’s Bluetooth 5.0 low energy RF module based on the Toshiba TC35680 single-chip controller is an ideal choice for battery-powered devices.
Omron's C3AW trigger switch features a sealed boot for anti-dust applications and offers the popular forward and reverse functions for power-tools.
Panasonic's EX-Z sensors are offered in two configurations: front sensing and side sensing, with the latter best suited for use in the narrowest of spaces.
RECOM’s REM2 series is a 2 W medical-grade DC/DC converter in a compact SIP8 package providing single or dual outputs.
Molex's ultra-fit tangless connector is a wire-to-board system that offers a 3.50 mm pitch and superior design options for flexibility and efficient assembly.
PIC GmbH's Hall sensors offer no mechanical movement, higher switching frequency compared to reed sensors, a mechanically protected IC, and easy assembly.
Nexperia’s TrEOS single-line ESD protection with low capacitance, low clamping voltage, and high ESD robustness helps safeguard 10 Gbps+ data lines systems.
Carlo Gavazzi’s A82/E83 series measure currents up to 500 AAC and provide AC or voltage outputs used to interface with monitoring relays or PLCs.
Molex delivers a wide range of fast, reliable products including router, server & storage applications to meet the growing demands for your data center.
Nordic Semiconductor’s nRF52811 Bluetooth® 5.1 SoC with comprehensive protocol support is built around a 64 MHz Arm® Cortex®-M4 CPU.
TSC's BZD27C11PW and BZD27C220PW (1 W) Zener product series are designed for high-frequency miniature switched mode power supplies.
Osram's GW CSSRM3.PM is a compact, fifth-generation, 3030 OSLON® Square 2 W high-power LED.
Qualtek’s USB 3.1 cables along with the Type-C™ connector allows you to charge and power your USB-C enabled device, sync and transfer data quickly and safely.
Schaffner's FN9255 series of RFI filters is developed for higher frequencies up to 300 MHz.
Insight SiP's ISP1507-AX all-purpose Bluetooth® module offers a miniature SiP format and is based on Nordic Semi's class-leading nRF52 family of devices.
FLIR's IRW series inspection windows allow for fast inspections of electrical gear by eliminating the need to remove panel covers or open electrical cabinets.
TE Connectivity’s compact AD-101 air bubble detector is for non-invasive, continuous monitoring of fluid.
Wurth Electronics' WE-CLFS series single-phase filters are offered in single-stage, single-stage advanced, and two-stage versions.
Broadcom's ACPL-M61M optocoupler combines LED and integrated high gain photo detector to address low power consumption and high operating temperature needs.
Thomas Research Products' SSP3 series provides one of the most comprehensive lines of surge protectors in North America designed specifically for lighting.
Analog Devices' ADHV4702-1 precision op-amp features input stage architecture making it ideal for precision demanding applications such as ATE.