DOC-EVAL Quick Start Guide Datasheet by Connor Winfield

ROHS w m w
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851- 4722
Fax: 630- 851- 5040
www.conwin.com
Bulletin Cx260-EVAL
Page 1 of 1
Revision P00
Date 13 Aug 2014
General Instructions
1. Insert the unit into the eval board socket
Pin 1 of the socket is indicated by the “1” on the board silk-screen on the lower left.
Press the unit down firmly
2. Connect power
Connect the Vcc banana plug on the right to a +3.3V power supply capable
of ~ 800mA of current.
3. Connect output:
Connect the “CMOS OUT” BNC J6 on the upper right to an oscilloscope or frequency
counter input. Use a high impedance probe if possible.
4. Connect voltage control:
For DOC-series parts with voltage control (VCOCXO) option, connect “CV Input” BNC J5
on the upper left to a 1.65Vdc supply.
DOC-EVAL
Eval Board Quick Start Guide
Available at Digi-Key
www.digikey.com
Q
U
I
C
K
S
T
A
R
T
G
U
I
D
E