Engineering Resources
Featured Content
Optical light used for liquid detection has many benefits over conventional sensors.
ACT2803 is a space-saving and dedicated single-chip solution for dual-cell battery charge and discharge. It takes 5 V USB input source to charge a dual-cell battery with boost configuration in three phases: preconditioning, constant current, and constant voltage.
The design of programmable hardware traditionally is derived from a strong mechanical engineering legacy using embedded devices to mimic what used to be done mechanically or electromechanically somewhat.
This video demos the HD video transmission solution ViuLinx™ from ADI's partner Taisync, enabled by AD9361.
The document describes a non-isolated, high-efficiency, high power factor (PF) LED driver designed to drive a nominal LED string voltage of 85 V at 200 mA from an input voltage range of 90 VAC to 135 VAC (47 Hz – 63 Hz).
Designers are being increasingly asked to add image and video analysis capabilities to current networks and new products, particularly for security applications. Facial and vehicle recognition is especially desirable and can add considerable value.
The Thermocouple Reference Design demonstrates how to instrument a Thermocouple and accurately sense temperature over the entire Thermocouple measurement range.
Designers have been looking for ready-to-use, drop-in parts to provide low-voltage DC output rails in the moderate current range of 1 A to 10 A which meet basic performance objectives as well as efficiency and regulatory mandates.
RECOM’s high-quality AC/DC DIN-Rail power supply series is available for either 1-phase or 2 and 3-phase mains environment.
The RN-41-EK evaluation board is a field-ready, Bluetooth SIG qualified prototyping platform for the RN41 modules.
Featured Resources
App Note Archive
The engineering library contains thousands of quality application notes and white papers from Digi-Key manufacturers.
