MMZ1608 Series, Commercial Datasheet

TDK Corporation

View All Related Products | Download PDF Datasheet

Datasheet

May 2018
EMC Components
For general signal line
MMZ1608 1608[0603 inch]*
* Dimensions Code JIS[EIA]
Chip beads
MMZ1608
type
MMZ series
(2/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
EMC Components
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
Chip beads
For general signal line
FEATURES
Noise reduction solution for general signal line.
Various frequency characteristics with 8 materials of different features for countermeasures against everything from general signals to
high-speed signals.
APPLICATION
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
The Storage temperature range is for after the circuit board is mounted.
Overview of MMZ1608 type
MMZ 1608 S 121 A T A00
Series name L×W×T dimensions Material name Impedance Characteristic
type Packaging style Internal code
(mm) () at 100MHz
1608 1.6×0.8x0.6 A 121 120 C T Taping A00
1.6×0.8x0.8 B A AH0
DB
F
Q
R
S
Y
Type
Temperature range Package quantity Individual weight
Operating
temperature
°C
Storage
temperature
°C (pieces/reel) mg
MMZ1608 t=0.6mm –55 to +125 –55 to +125 4,000 3
t=0.8mm –55 to +125 –55 to +125 4,000 4
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
RECOMMENDED REFLOW PROFILE
Preheating Soldering Peak
Temp. Time Temp. Time Temp. Time
T1 T2 t1 T3 t2 T4 t3
150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s
Natural
cooling
t3
t1
Preheating
t2
Soldering
T3 T3
T4
T2
T1
t: Time
Peak
T: Temperature
(5/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling
requiring good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
A material: This high-impedance product is based on the impedance frequency characteristics of our Y-material. The product offers
excellent impedance characteristics, which is greater than 2500, in the vicinity of 100MHz range (MMZ1608A252B).
Q material: For high-band applications designed for 100MHz and above. Impedance values selected for effectiveness at 100 to 800MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak
frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in
the GHz range.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
0
500
1000
1500
2000
2500
10 100 1000
Frequency(MHz)
Impedance(Ω)
B
RS
A
Y
Q
DF
(6/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Thickness(T)
0.6±0.15mm
0.8±0.15mm
0.8±0.15
1.6±0.15
0.3±0.2
T
Dimensions in mm
0.80.6 0.6
0.8
(7/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
Equivalent measurement equipment may be used.
Impedance DC resistance Rated current Thickness T Part No.
[100MHz]
()Tolerance ()max. (mA)max. (mm)
120 ±25% 0.15 600 0.6 MMZ1608B121CTAH0
220 ±25% 0.25 500 0.6 MMZ1608B221CTAH0
300 ±25% 0.25 500 0.6 MMZ1608B301CTAH0
470 ±25% 0.30 500 0.6 MMZ1608B471CTAH0
600 ±25% 0.40 500 0.6 MMZ1608B601CTAH0
1000 ±25% 0.60 300 0.8 MMZ1608B102CTA00
15 ±25% 0.05 1500 0.8 MMZ1608R150ATA00
30 ±25% 0.05 1500 0.8 MMZ1608R300ATA00
60 ±25% 0.10 800 0.8 MMZ1608R600ATA00
120 ±25% 0.18 500 0.8 MMZ1608R121ATA00
300 ±25% 0.25 500 0.8 MMZ1608R301ATA00
470 ±25% 0.30 500 0.8 MMZ1608R471ATA00
600 ±25% 0.40 500 0.8 MMZ1608R601ATA00
1000 ±25% 0.50 400 0.8 MMZ1608R102ATA00
40 ±25% 0.10 600 0.8 MMZ1608S400ATA00
80 ±25% 0.15 500 0.8 MMZ1608S800ATA00
120 ±25% 0.15 500 0.8 MMZ1608S121ATA00
180 ±25% 0.20 500 0.8 MMZ1608S181ATA00
220 ±25% 0.20 500 0.8 MMZ1608S221ATA00
300 ±25% 0.30 500 0.8 MMZ1608S301ATA00
470 ±25% 0.30 500 0.8 MMZ1608S471ATA00
600 ±25% 0.35 500 0.8 MMZ1608S601ATA00
1000 ±25% 0.50 400 0.8 MMZ1608S102ATA00
2000 ±25% 0.90 200 0.8 MMZ1608S202ATA00
15 ±25% 0.05 1500 0.8 MMZ1608Y150BTA00
30 ±25% 0.05 1500 0.8 MMZ1608Y300BTA00
60 ±25% 0.15 500 0.8 MMZ1608Y600BTA00
120 ±25% 0.20 500 0.8 MMZ1608Y121BTA00
220 ±25% 0.30 500 0.8 MMZ1608Y221BTA00
300 ±25% 0.30 500 0.8 MMZ1608Y301BTA00
470 ±25% 0.35 500 0.8 MMZ1608Y471BTA00
600 ±25% 0.40 500 0.8 MMZ1608Y601BTA00
750 ±25% 0.45 500 0.8 MMZ1608Y751BTA00
1000 ±25% 0.50 400 0.8 MMZ1608Y102BTA00
1500 ±25% 0.60 300 0.8 MMZ1608Y152BTA00
1800 ±25% 0.80 200 0.8 MMZ1608A182BTA00
2200 ±25% 0.80 200 0.8 MMZ1608A222BTA00
2500 ±25% 0.80 200 0.8 MMZ1608A252BTA00
120 ±25% 0.30 500 0.8 MMZ1608Q121BTA00
220 ±25% 0.40 500 0.8 MMZ1608Q221BTA00
330 ±25% 0.50 400 0.8 MMZ1608Q331BTA00
470 ±25% 0.70 300 0.8 MMZ1608Q471BTA00
600 ±25% 0.80 200 0.8 MMZ1608Q601BTA00
1000 ±25% 1.00 200 0.8 MMZ1608Q102BTA00
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Keysight Technologies
DC resistance Type-7556 Yokogawa
(8/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
Equivalent measurement equipment may be used.
Impedance DC resistance Rated current Thickness T Part No.
[100MHz]
()Tolerance ()max. (mA)max. (mm)
20.05 700 0.8 MMZ1608D050CTA00
10 ±50.10 500 0.6 MMZ1608D100CTAH0
22 ±25% 0.20 500 0.6 MMZ1608D220CTAH0
50 ±25% 0.25 500 0.6 MMZ1608D500CTAH0
80 ±25% 0.30 500 0.6 MMZ1608D800CTAH0
80 ±25% 0.30 500 0.8 MMZ1608D800BTA00
120 ±25% 0.30 400 0.6 MMZ1608D121CTAH0
120 ±25% 0.30 400 0.8 MMZ1608D121BTA00
240 ±25% 0.60 300 0.8 MMZ1608D241CTA00
300 ±25% 0.70 300 0.8 MMZ1608D301BTA00
3typ. 0.05 700 0.8 MMZ1608F030BTA00
47 ±25% 0.40 500 0.8 MMZ1608F470BTA00
75 ±25% 0.55 300 0.8 MMZ1608F750BTA00
120 ±25% 0.75 200 0.8 MMZ1608F121BTA00
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Keysight Technologies
DC resistance Type-7556 Yokogawa
(9/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ1608B series MMZ1608R series MMZ1608S series
MMZ1608Y series MMZ1608A series MMZ1608Q series
MMZ1608D series MMZ1608F series
100
300
500
700
0
200
400
600
800
900
1000
1100
1200
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608B221C
MMZ1608B102C MMZ1608B601C
MMZ1608B471C MMZ1608B301C
MMZ1608B121C
100
300
500
1200
1000
1100
800
900
600
700
400
200
0100001000100101
Frequency (MHz)
Impedance (Ω)
Z
MMZ1608R102A
MMZ1608R600A
MMZ1608R300A
MMZ1608R601A
MMZ1608R301A
MMZ1608R121A
MMZ1608R471A
MMZ1608R150A
0
500
1000
1500
2000
2500
3000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608S102A
MMZ1608S601A
MMZ1608S471A
MMZ1608S202A
MMZ1608S301A
MMZ1608S221A
MMZ1608S181A
MMZ1608S121A
MMZ1608S800A
MMZ1608S400A
0
200
400
600
800
1000
1200
1400
1600
1800
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608Y152B
MMZ1608Y221B
MMZ1608Y600B
MMZ1608Y121B
MMZ1608Y301B
MMZ1608Y471B
MMZ1608Y601B
MMZ1608Y300B
MMZ1608Y150B
MMZ1608Y751B
MMZ1608Y102B
0
500
1000
1500
2000
2500
3000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608A252B
MMZ1608A222B
MMZ1608A182B
0
1000
2000
200
400
600
800
1200
1400
1600
1800
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608Q102B
MMZ1608Q121B
MMZ1608Q221B
MMZ1608Q331B
MMZ1608Q471B
MMZ1608Q601B
3000
2500
2000
1500
1000
500
0100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608D301B
MMZ1608D241C
MMZ1608D121C
MMZ1608D220C
MMZ1608D050C
MMZ1608D100C
MMZ1608D500C
MMZ1608D800B
MMZ1608D800C
MMZ1608D121B
0
1000
500
2000
3000
4000
5000
1500
2500
3500
4500
5500
6000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1608F121B
MMZ1608F030B
MMZ1608F470B
MMZ1608F750B
(10/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1608B121CTAH0 MMZ1608B221CTAH0 MMZ1608B301CTAH0
MMZ1608B471CTAH0 MMZ1608B601CTAH0 MMZ1608B102CTA00
MMZ1608R150ATA00 MMZ1608R300ATA00 MMZ1608R600ATA00
MMZ1608R121ATA00 MMZ1608R301ATA00 MMZ1608R471ATA00
MMZ1608R601ATA00 MMZ1608R102ATA00 MMZ1608S400ATA00
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
20
40
60
80
100
120
140
160
0
50
100
150
200
250
300
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
50
100
150
200
250
300
350
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
600
10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
700
600
500
400
300
200
100
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
200
400
600
800
1000
1200
10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
5
10
15
20
1 10 100 1000 10000
0
5
10
15
20
25
30
35
40
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
0
ZR
X
Frequency (MHz)
Impedance (Ω)
10
20
30
40
50
60
70
80
90
01 10 100 1000 10000
20
40
60
80
100
120
140
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
50
100
150
200
250
300
350
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
600
10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
1200
1000
800
600
400
200
0
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
Z
R
X
100
200
300
400
500
600
700
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
10
20
30
40
50
60
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
(11/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1608S800ATA00 MMZ1608S121ATA00 MMZ1608S181ATA00
MMZ1608S221ATA00 MMZ1608S301ATA00 MMZ1608S471ATA00
MMZ1608S601ATA00 MMZ1608S102ATA00 MMZ1608S202ATA00
MMZ1608Y150BTA00 MMZ1608Y300BTA00 MMZ1608Y600BTA00
MMZ1608Y121BTA00 MMZ1608Y221BTA00 MMZ1608Y301BTA00
ZR
X
0
20
40
60
80
100
120
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
20
40
60
80
100
120
140
160
180
Frequency (MHz)
Impedance (Ω)
Z
R
X
10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
0
50
100
150
200
250
300
R
Z
X
1 10 100 1000 10000
50
100
150
200
250
300
350
400
450
0
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
50
100
150
200
250
300
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
0
100
200
300
400
500
600
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
0
100
200
300
400
500
600
700
Frequency (MHz)
Impedance (Ω)
X
Z
R
1 10 100 1000 10000
0
200
400
600
800
1000
1200
1400
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
500
1000
1500
2000
2500
3000
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
10
20
30
40
50
60
1 10 100 1000 10000
0
5
10
15
20
25
Frequency (MHz)
Impedance (Ω)
Z
R
X
120
40
20
60
80
100
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
50
100
150
200
250
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
600
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
(12/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1608Y471BTA00 MMZ1608Y601BTA00 MMZ1608Y751BTA00
MMZ1608Y102BTA00 MMZ1608Y152BTA00
MMZ1608A182BTA00 MMZ1608A222BTA00 MMZ1608A252BTA00
MMZ1608Q121BTA00 MMZ1608Q221BTA00 MMZ1608Q331BTA00
MMZ1608Q471BTA00 MMZ1608Q601BTA00 MMZ1608Q102BTA00
1 10 100 1000 10000
0
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
600
700
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
0
200
400
600
800
1000
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
200
400
600
800
1000
1200
1400
1600
1800
0
500
1000
1500
2000
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
0
500
1000
1500
2000
2500
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
RX
01 10 100 1000 10000
Z
RX
500
1000
1500
2000
2500
3000
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
50
100
150
200
250
300
350
Frequency (MHz)
Impedance (Ω)
ZR
X
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
600
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
RX
0
200
400
600
800
1000
1200
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
RX
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
RX
0
500
1000
1500
2000
(13/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1608D050CTA00 MMZ1608D100CTAH0 MMZ1608D220CTAH0
MMZ1608D500CTAH0 MMZ1608D800CTAH0 MMZ1608D800BTA00
MMZ1608D121CTAH0 MMZ1608D121BTA00 MMZ1608D241CTA00
MMZ1608D301BTA00 MMZ1608F030BTA00 MMZ1608F470BTA00
MMZ1608F750BTA00 MMZ1608F121BTA00
Z
R
X
0
5
10
15
20
25
30
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
10
20
30
40
50
60
70
80
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
0
Z
R
X
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
600
200
100
300
400
500
01 10 100 1000 10000
Z
RX
Frequency (MHz)
Impedance (Ω)
ZR
X
1 10 100 1000 10000
400
200
100
300
0
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
100
200
300
400
500
600
Frequency (MHz)
Impedance (Ω)
ZR
X
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
Z
X
R
1 10 100 1000 10000
800
700
600
500
400
300
200
100
0
Frequency (MHz)
Impedance (Ω)
Z
X
R
1200
1000
800
600
400
200
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
Z
X
1 10 100 1000 10000
3000
2500
2000
1500
1000
500
0
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
5
10
15
20
25
30
35
Frequency (MHz)
Impedance (Ω)
Z
R
X
100
200
300
400
500
600
700
800
900
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
Z
X
0
500
1000
1500
2000
1 10 100 1000 10000
Z
RX
Frequency (MHz)
Impedance (Ω)
0
1000
2000
3000
4000
5000
6000
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
X
R
(14/14)
20180521 / beads_commercial_signal_mmz1608_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
MMZ1608 type
PACKAGING STYLE
REEL DIMENSIONS
TAPE DIMENSIONS
Dimensions in mm
Ty p e A B P1 K
MMZ1608 1.1±0.2 1.9±0.2 4.0±0.1 1.1max.
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
Dimensions in mm
1.0
ø60min.
14.4max.
8.4 +2.0
–0.0
B
A
8.0±0.3
3.5±0.05
1.75±0.1
4.0±0.1
4.0±0.1
2.0±0.05
1.5 +0.1
0
K
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm

Products

FERRITE BEAD 600 OHM 0603 1LN
Available Quantity221480
Unit Price0.08
FERRITE BEAD 1 KOHM 0603 1LN
Available Quantity143224
Unit Price0.08
FERRITE BEAD 600 OHM 0603 1LN
Available Quantity90742
Unit Price0.08
FERRITE BEAD 1 KOHM 0603 1LN
Available Quantity62731
Unit Price0.08
FERRITE BEAD 40 OHM 0603 1LN
Available Quantity198284
Unit Price0.08
FERRITE BEAD 2 KOHM 0603 1LN
Available Quantity129373
Unit Price0.08
FERRITE BEAD 30 OHM 0603 1LN
Available Quantity98844
Unit Price0.08
FERRITE BEAD 120 OHM 0603 1LN
Available Quantity69277
Unit Price0.08
FERRITE BEAD 1.5 KOHM 0603 1LN
Available Quantity65529
Unit Price0.08
FERRITE BEAD 600 OHM 0603 1LN
Available Quantity55202
Unit Price0.08
FERRITE BEAD 1 KOHM 0603 1LN
Available Quantity43641
Unit Price0.08
FERRITE BEAD 60 OHM 0603 1LN
Available Quantity26568
Unit Price0.08
FERRITE BEAD 300 OHM 0603 1LN
Available Quantity15723
Unit Price0.08
FERRITE BEAD 60 OHM 0603 1LN
Available Quantity14372
Unit Price0.08
FERRITE BEAD 120 OHM 0603 1LN
Available Quantity13041
Unit Price0.08
FERRITE BEAD 180 OHM 0603 1LN
Available Quantity8581
Unit Price0.08
FERRITE BEAD 80 OHM 0603 1LN
Available Quantity5542
Unit Price0.08
FERRITE BEAD 300 OHM 0603 1LN
Available Quantity7338
Unit Price0.08
FERRITE BEAD 470 OHM 0603 1LN
Available Quantity6818
Unit Price0.08
FERRITE BEAD 2.5 KOHM 0603 1LN
Available Quantity20637
Unit Price0.08