GBP | USD

CERALOCK® Series Datasheet

Murata Electronics North America

View All Related Products | Download PDF Datasheet

Datasheet

Ceramic Resonators
(CERALOCKr)
P16E.pdf
Apr.25,2017
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2&-@
F-'12&#30-.#,'0#!2'4#
|z{{GG-,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*,"*#!20-,'!/3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#
.%#A3021..0-!&$-0-
H&22.BGG555@+302@!-+G#,-
#3G13..-02G!-+.*',!#G0-&1J@
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Please check the MURATA website (http://www.murata.com/)
if you cannot find a part number in this catalog.
CERALOCKr, CERALOCK(R) and "CERALOCK"
in this catalog are the trademarks of
Murata Manufacturing Co., Ltd.
Product specifications are as of March 2017.
Selection Guide p2
Part Numbering p3
MHz Chip Type -Tight Frequency
Tolerance for Automotive p4
Application Circuits Utilization p6
MHz Chip Type -Standard Frequency
Tolerance for Automotive p7
Application Circuits Utilization p10
Notice for Automotive p11
Packaging for Automotive p14
1
2
MHz Chip Type
-Tight Frequency Tolerance
for Consumer/Industrial Usage p16
Application Circuits Utilization p19
3
MHz Chip Type
-Standard Frequency Tolerance
for Consumer/Industrial Usage p20
Application Circuits Utilization p23
4
Notice for Consumer/Industrial Usage
MHz Chip Type p28
MHz Lead Type p33
Packaging for Consumer/Industrial Usage
MHz Chip Type p34
MHz Lead Type p36
MHz Lead Type
-Standard Frequency Tolerance
for Consumer/Industrial Usage p25
Application Circuits Utilization p27
5
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
2
3
4
5
Selection Guide
SMD
Consumer/Industrial
SMD
2.00–3.99MHz
CSTCC_G_A
SMD
14.00–20.00MHz
CSTCE_V13C
8.00–13.99MHz
CSTCE_G15C
8.00–13.99MHz
CSTCE_G_A
14.00–20.00MHz
CSTCE_V_C
4.00–7.99MHz
CSTCR_G_B
4.00–7.99MHz
CSTCR_GH5L
CSTCR_G15L
8.00–13.99MHz
CSTCE_GH5L
CSTCE_G15L
14.00–20.00MHz
CSTCE_VH3L
CSTCE_V13L
2.00–3.99MHz
CSTCC_G
8.00–13.99MHz
CSTCE_G
14.00–20.00MHz
CSTCE_V
4.00–7.99MHz
CSTCR_G
Leaded
3.40–10.00MHz
CSTLS_G
16.00–70.00MHz
CSTLS_X
4.00–7.99MHz
CSTCR_G15C
SMD
Automotive
Standard ToleranceTight Tolerance Standard ToleranceTight Tolerance
Applications
Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics,
Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specification.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
o Part Numbering
3
CE
2
T
1
CS
5
V
4
16M0
6
5
8
***
7
3
9
-R0
(Part Number)
1Product ID
2Frequency/Capacitance
CERALOCKr (MHz)
CS Ceramic Resonators
Product ID
3Structure/Size
Three-digit alphanumerics express
"Individual Specification."
8Individual Specification
***
Code Individual Specification
With standard products, "8Individual Specification" and "9Packaging"
is omitted.
MHz with Built-in Capacitance
T
Code Frequency/Capacitance
Round Lead Type
Cap Chip Type
Small-cap Chip Type
LS
CC
CR/CE
Code Structure/Size
4Nominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M."
5Design
G
V
Thickness Shear mode
Thickness Expander mode
Code Design
7Load Capacity
1
2
3
5
6
5pF
10pF
15pF
33/39pF
47pF
Code Load Capacity
Bulk
Radial Taping H0=18mm
Plastic Taping ø=180mm Reel
Plastic Taping ø=330mm Reel
9Packaging
-B0
-A0
-R0/*R0
-R1
Code
F"'*2.',%'1..*'#"2-*#"27.#,".*12'!2.',%2-!&'.27.#@
6Initial Frequency Tolerance
±0.5%
±0.3%
±0.2%
±0.1%
±0.07%
5
3
2
1
H
Code Initial Frequency Tolerance
Packaging
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Tight Frequency Tolerance for Automotive
Chip type CERALOCKr with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
CERALOCKr with built-in load capacitors.
This diverse series owes its development to MURATA's
original mass production techniques and high reliability,
and has achieved importance in the worldwide automotive
market.
Features
1. The series are high accuracy resonators whose total
tolerance is available for less than ±3,000ppm.
2. The series has high reliability and is available for a wide
temperature range.
3. Oscillation circuits do not require external load capacitors.
4. The series is available for a wide frequency range.
5. The resonators are extremely small and have a low profile.
6. No adjustment is necessary for oscillation circuits.
Applications
1. Cluster panel and Control panel
2. Safety control
Anti-lock Brake System, Electronic Stability Control,
Airbag, etc.
3. Engine ECU, Electronic Power Steering, Immobilizer, etc.
4. Car Air conditioner, Power Window,
Remote Keyless Entry system, etc.
5. Intelligent Transportation System
Lane Keeping System, Millimeter wave radar, etc.
6. Battery control for hybrid cars
Part Number Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTCR_G15C 4.00 to 7.99 ±0.1 ±0.13 -40 to 125
CSTCE_G15C 8.00 to 13.99 ±0.1 ±0.13 -40 to 125
CSTCE_V13C 14.00 to 20.00 ±0.1 ±0.13 -40 to 125
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
CSTCR_G15C
4.00-7.99MHz
CSTCE_G15C
8.00-13.99MHz
CSTCE_V13C
14.00-20.00MHz
4.5±0.1
4.1 max.
0.4 (ref.)
0.4±0.1 0.4±0.1
0.4±0.1
(3) (2) (1)
0.6±0.05
0.75±0.1 1.5±0.1 1.5±0.1
0.4 (ref.)
0.4 (ref.)
0.2±0.2
0.30±0.20
2.0±0.1
1.1±0.1
1.4 max.
(in mm)
*: EIAJ Monthly
Code
*
3.2±0.15
1.3±0.15
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
3.0 max.
0.10±0.10
0.4±0.1
0.4±0.1 1.2±0.1 1.2±0.1
(1)(2)(3)
0.1±0.1
1.1 max.
0.4±0.1
0.70±0.10
0.4±0.1 0.4±0.1
(in mm)
*
*: EIAJ Monthly
Code
3.2±0.15
0.10±0.10
0.1±0.1
1.3±0.15
1.1 max.
0.4±0.1
0.5 (ref.) 0.5 (ref.)
0.9±0.1
3.0 max.
0.4±0.1
(1)(2)(3)
0.4±0.1 1.2±0.1 1.2±0.1
0.4±0.10.4±0.1
0.5 (ref.)
(in mm)
*: EIAJ Monthly
Code
*
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4
1
Measuring Circuit of Oscillating Frequency
Standard Land Pattern Dimensions
Frequency Temperature Characteristics
VDD
Rf To Frequency Counter
5pF
1MΩ
Rd
C1 C2
(1) (3)
(2)
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+0.2
+0.1
0
-0.1
-0.2
2.6
0.4
1.5 1.5
1.1
0.4 0.41.1
Land Pattern
(in mm)
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
CSTCR_G15C
(* This Land Pattern is not common to CSTCR_G.)
CSTCE_G15C
CSTCE_V13C
(* This Land Pattern is not common to CSTCE_V.)
CSTCR_G15C
CSTCE_V13CCSTCE_G15C
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
1
TMP92CD54IF (Toshiba)
MC68HC908AZ60AVFU (Freescale)
µPD70F3283YGC (Renesas)
MB90F387 (Fujitsu)
ST72F561 (HS) (ST Microelectronics)
M30842MCT-XXXGP (Renesas)
16-bit Microcomputer
8-bit Microcomputer
32-bit Microcomputer
16-bit Microcomputer
8-bit Microcomputer
16-bit Microcomputer
Application Circuits Utilization
H1
0.1μF
74 72 L
IC : TMP92CD54IF
Vcc3=3.3V
CERALOCKr
C1C2
CERALOCKr: CSTCE10M0G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
H2
Vcc5=5.0V
V2V1
H1: 36, 68, 86
H2: 2, 4, 15, 40, 50, 61, 75
L: 1, 3, 13, 38, 51, 63, 73, 88
59 58 GND
EVALUATION BOARD
IC : MC68HC908AZ60AVFU
Vdd=5.0V
CERALOCKr: CSTCE16M0V13Cpp-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
CERALOCKr
C1C2
V2V1
1MΩ
H14
12 13 L10
4.7μF
IC : μPD70F3283YGC
Vdd=3.3V
10kΩ
H: 1, 5, 9, 34, 70
L: 2, 8, 11, 15, 33, 69
CERALOCKr
C1C2
CERALOCKr: CSTCE10M0G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
H
0.1μF
2827 L26
IC : MB90F387
Vcc=5.0V
CERALOCKr
C1C2
CERALOCKr: CSTCE8M00G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
H: 1, 2, 21, 22, 24
L: 20, 23, 25, 48
H60
12L
IC : ST72F561 (HS)
Vdd=5.0V
H: 9, 25, 41, 57, 58
L: 8, 24, 40, 55, 56
CERALOCKr
C1C2
CERALOCKr: CSTCE8M00G15App-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
H19
22 20 L
IC : M30842MCT-XXXGP (High*)
H: 23, 24, 37, 39, 59, 74, 91, 118, 122,
132, 142, 143
L: 15, 16, 21, 36, 41, 57, 76, 93,
110~113, 120, 121, 130, 140
CERALOCKr
C1C2
CERALOCKr: CSTCE8M00G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
Vcc=5.0V
*High: XIN-XOUT Drive Capacity Select Bit
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
1
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Standard Frequency Tolerance for Automotive
Chip type CERALOCKr with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
CERALOCKr with built-in load capacitors.
This diverse series owes its development to MURATA's
original mass production techniques and high reliability,
and has achieved importance in the worldwide automotive
market.
Features
1. The series has high reliability and is available for a wide
temperature range.
2. Oscillation circuits do not require external load capacitors.
3. The series is available in a wide frequency range.
4. The resonators are extremely small and have a low profile.
5. No adjustment is necessary for oscillation circuits.
Applications
1. Cluster panel and Control panel
2. Safety control
Anti-lock Brake System, Electronic Stability Control,
Airbag, etc.
3. Engine ECU, Electronic Power Steering, Immobilizer, etc.
4. Car Air conditioner, Power Window,
Remote Keyless Entry system, etc.
5. Electronic Toll Collection system, Car Navigation, etc.
CSTCC_G_A
2.00-3.99MHz
CSTCR_G_B
4.00-7.99MHz
CSTCE_G_A
8.00-13.99MHz
CSTCE_V_ C
14.00-20.00MHz
0.45
(Ref.)
1.2±0.2
6.6 max.
(3) (2) (1)
0.3±0.3 0.5±0.05
2.5±0.1 2.5±0.1
1.1±0.1
7.2±0.2
3.0±0.2
t
0.45±0.3
t : 1.75±0.05
(2.00—2.99MHz)
t : 1.55±0.05
(3.00MHz—)
1.4±0.2 1.2±0.2
0.45
(Ref.) 0.45
(Ref.)
2.1 max.
(in mm)
*
*: EIAJ code
4.5±0.1
4.1 max.
0.8±0.1
0.75±0.1 1.5±0.1 1.5±0.1
0.4±0.1 0.4±0.1 0.4±0.1
0.8±0.1 0.8±0.1
0.4 (ref.)0.4 (ref.)0.4 (ref.)
0.4±0.05
0.2±0.2
0.3±0.2
2.0±0.1
1.4 max.
(2) (1)(3)
1.15±0.05
(in mm)
*
* : EIAJ Monthly
Code
3.2±0.15
1.3±0.15
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
3.0 max.
0.10±0.10
0.4±0.1
0.4±0.1 1.2±0.1 1.2±0.1
(1)(2)(3)
0.1±0.1
1.1 max.
0.4±0.1
0.70±0.10
0.4±0.1 0.4±0.1
(in mm)
*
3.2±0.15
0.10±0.10
0.1±0.1
1.3±0.15
1.1 max.
0.4±0.1
0.5 (ref.) 0.5 (ref.)
0.9±0.1
3.0 max.
0.4±0.1
(1)(2)(3)
0.4±0.1 1.2±0.1 1.2±0.1
0.4±0.10.4±0.1
0.5 (ref.)
(in mm)
*: EIAJ Monthly
Code
*
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
2
Rf
Rd
VDD
C1 C2
To Frequency Counter
(1) (3)
(2)
CSTCC_G_A
VDD
Rf To Frequency Counter
5pF
1MΩ
Rd
C1 C2
(1) (3)
(2)
CSTCE_G_A/CSTCE_V_C/CSTCR_G_B
Part Number Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTCC_G_A 2.00 to 3.99 ±0.5
±0.4 [-0.6% to +0.3%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz]
-40 to 125
CSTCR_G_B 4.00 to 7.99 ±0.5 ±0.15 -40 to 125
CSTCE_G_A 8.00 to 13.99 ±0.5 ±0.2 -40 to 125
CSTCE_V_C
14.00 to 20.00
±0.5 ±0.15 -40 to 125
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
3.8~4.4
1.2 1.2
2.5 2.5
1.4 1.2 1.2
Land Pattern
(in mm)
CSTCC_G_A
2.6
1.6
0.8
0.4
1.5 1.5
0.4 0.4
0.8 0.8
0.70.7
Land Pattern
(in mm)
CSTCR_G_B
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
CSTCE_G_A
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
CSTC E _V_ C
(* This Land Pattern is not common to CSTCE_V.)
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
2Measuring Circuit of Oscillating Frequency
Standard Land Pattern Dimensions
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+0.2
+0.1
0
-0.1
-0.2
CSTCC_G_A
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
CSTCR_G_B
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+0.2
+0.1
0
-0.1
-0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
CSTCE_G_A CSTCE_V_C
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
2
Frequency Temperature Characteristics
Application Circuits Utilization
H
23
10kΩ
L8
IC : μPD78F9222MC-5A4
Vdd=5.0V
H: 5, 20
L: 1
CERALOCKr
C
1
C
2
CERALOCKr: CSTCR6M00G55B-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
6
V'dd=7.0V
V2V1
H
93 92 L
IC : MB90F347D
Vcc=5.0V
CERALOCKr
C1C2
CERALOCKr: CSTCE8M00G55A-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
H: 15, 32, 65, 90
L: 16, 35, 44, 66, 91
H
42 41 L
IC : ST72F324J6T3 (MS)
Vdd=5.0V
CERALOCKr
C1C2
CERALOCKr: CSTCR4M00G55B-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
H: 13, 21, 32, 43
L: 14, 22, 33, 39, 40
8-bit Microcomputer
16-bit Microcomputer
8-bit Microcomputer
H7
23 24 L
IC : M30260F8AGP (High*)
Vcc=5.0V
H: 11, 46, 47, 48
L: 4, 9, 44
*
High: XIN-XOUT Drive Capacity Select Bit
CERALOCKr
C1C2
CERALOCKr: CSTCE10M0G55A-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
59 58 GND
EVALUATION BOARD
IC : MC68HC908AZ60AVFU
Vdd=5.0V
CERALOCKr: CSTCE16M0V53C-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
CERALOCKr
C1C2
V2V1
1MΩ
23L
IC : PIC12F675-I/P(HS)
Vdd=5.0V
CERALOCKr: CSTCE8M00G52A-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
CERALOCKr
C1C2
V2V1
1MΩ
H
H: 1
L: 4, 8
16-bit Microcomputer
8-bit Microcomputer
8-bit Microcomputer
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
2
µPD78F9222MC-5A4 (Renesas)
MB90F347D (Fujitsu)
ST72F324J6T3 (MS) (ST Microelectronics)
M30260F8AGP (Renesas)
MC68HC908AZ60AVFU (Freescale)
PIC12F675-I/P (HS) (Microchip)
Notice for Automotive
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
1. Soldering
(1) Reflow soldering
Recommendable Flux and Solder
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
(2) Soldering with Iron
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
(3) Solder Volume
Do not reuse components removed from a circuit board
after soldering.
(4) Other
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
(5) Conditions for Placement Machines
150
180
220
245
260
Gradual
Cooling
Peak
Pre-heating
(150 to 180°C)
Heating
(220°C min.)
60 to 120s 30 to 60s
Temperature (°C)
Flux
Solder
Please use rosin based flux,
not water soluble flux.
Recommendable Soldering Profile
Pre-heating
Heating
Peak Temperature
150 to 180°C
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
220°C min.
upper limit: 260°C
lower limit: 245°C
60 to 120s
30 to 60s
1s max.
5s max.
Temperature shall be measured on the surface of component.
Recommendable Soldering with Iron
Heating of the soldering iron
Watt
Shape of the soldering iron
350°C max.
30W max.
ø3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
Soldering Time
Solder
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
Soldering and Mounting (CSTCC_G_A, CSTCR_G_B/G15C, CSTCE_G_A/G15C, CSTCE_V_C/V13C Series)
Notice for Automotive
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to confirm
stable electrical characteristics are maintained.
3. Coating
dT=
<60°C (dT=Component-solvent)
*1 ex. If the component is immersed at +90°C into
cleaning solvent at +60°C, then dT=30°C.
(2) Temperature Difference : dT *1
5 minutes max. by blowing air at +80°C max.
(4) Drying
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
(5) Other
(a) Ultrasonic Wash
1 minute max. in above solvent at +60°C max.
(Frequency: 28kHz, Output: 20W/l)
(b) Immersion Wash
5 minutes max. in above solvent at +60°C max.
(c) Shower or Rinse Wash
5 minutes max. in above solvent at +60°C max.
(3) Conditions
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
2. Wash
(1) Cleaning Solvents
Continued from the preceding page.
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
Notice for Automotive
Storage and Operating Conditions
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature changes.
Please store the products under the following
conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the products
within six months after delivery. If you store the
products for a long time (more than six months),
use carefully because the products may be degraded
in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
Packaging for Automotive
(in mm)
(pcs.)
ab
CSTCC_G_A
CSTCR_G_B
CSTCR_G15C
CSTCE_G_A
CSTCE_G15C
CSTCE_V_C
CSTCE_V13C
Part Number Plastic Tape ø180mm Plastic Tape ø330mm Bulk Reel Dimensions
2,000
3,000
3,000
3,000
3,000
3,000
3,000
6,000
9,000
9,000
9,000
9,000
9,000
9,000
500
500
500
500
500
500
500
a
a
a
b
b
b
b
Trailer Leader
Empty Components
Cover Film
2.0±0.5
160-190
13.0
+1.0
0
0
–1.5
17.0±1.0
(ø180 )
0
–1.5
(ø180 )
ø13.0±0.2
400-560
Empty
160 min.
Trailer
160-190
Empty
160 min.
400-560
Cover Film
Leader
Empty Components
ø13.0±0.2 2.0±0.5
13.0±1.0
Dimensions of Reel
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
+1.0
0
9.0
(in mm)
4.0±0.1
2.0±0.05
(9.5)
4.0±0.1
ø1.5+0.1
-0
ø1.5+0.1
-0
12.0±0.2
5.5±0.05
1.75±0.1
0.3±0.05
1.25±0.05
(1.85 max.)
2.2±0.1
Direction of Feed
(3°)
10° Cover Film
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(3)(2)(1)
4.7±0.1
CSTCR_G15C
(in mm)
2.0±0.05
4.0±0.1
(3˚)
3.5±0.05
8.0±0.2
1.75±0.1
0.25±0.05
0.90±0.10
(1.30 max.)
10°
(5.2)
Cover Film
Direction of Feed
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
4.0±0.1
ø1.5 -0.0
+0.1
ø1.0 -0.0
+0.2
1.50 -0.05
+0.10
(3)(2)(1)
3.40 -0.05
+0.10
CSTCE_G15C
Continued on the following page.
Dimensions of Carrier Tape
(in mm)
4.0±0.1
Cover Film
4.0±0.1
2.0±0.05
8.0±0.2
ø1.5
+0.1
-0.0
ø1.0
+0.1
-0.0 +0.10
-0.05
3.5±0.05
1.75±0.1
3.45±0.1
Direction of Feed
0.25±0.05
(1.40 max.)
1.10±0.05
(3°)
1.50
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
10°
(5.2)
(2)(3) (1)
CSTCE_V13C
(in mm)
4.0±0.1
2.0±0.05
+0.3
-0.0
ø1.55±0.05
ø1.5
1.75±0.1
5.5±0.05
12.0±0.2
7.6±0.1
4.0±0.1
(9.5)
3.3±0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10° (3°)
t1 *1
t2 *2
0.3±0.05
Direction of Feed
(3) (1)
Frequency Range
Dimensions vary with frequency range of CERALOCKr.
2.00–2.99MHz 3.00–3.99MHz
1.85±0.05
2.45 max. 1.65±0.05
2.25 max.
(2)
t1
t2
*1, *2:
*1
*2
CSTCC_G_A
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
Minimum Quantity
Dimensions of Taping
Packaging for Automotive
(in mm)
4.0±0.1
2.0±0.05
(9.5)
4.0±0.1
(3)(2)(1)
ø1.5+0.1
-0
ø1.5+0.1
-0
12.0±0.2
5.5±0.05
1.75±0.1
4.7±0.1
2.2±0.1
Direction of Feed
(3°)
10° Cover Film
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
0.3±0.05
1.25±0.05
(1.85 max.)
Dimensions of Carrier Tape
(in mm)
4.0±0.1
Cover Film
4.0±0.1
2.0±0.05
8.0±0.2
ø1.5
+0.1
-0.0
ø1.0
+0.1
-0.0 +0.10
-0.05
3.5±0.05
1.75±0.1
3.45±0.1
Direction of Feed
0.25±0.05
(1.40 max.)
1.10±0.05
(3°)
1.50
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
10°
(5.2)
(2)(3) (1)
CSTCR_G_B
CSTC E _V_ C
(in mm)
2.0±0.05
4.0±0.1
(3˚)
3.5±0.05
8.0±0.2
1.75±0.1
0.25±0.05
0.90±0.10
(1.30 max.)
10°
(5.2)
Cover Film
Direction of Feed
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
4.0±0.1
ø1.5 -0.0
+0.1
ø1.0 -0.0
+0.2
1.50 -0.05
+0.10
(3)(2)(1)
3.40 -0.05
+0.10
CSTCE_G_A
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
15
Dimensions of Taping
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Tight Frequency Tolerance for Consumer/Industrial Usage
Chip type CERALOCKr with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and packaging technology
expertise has enabled the development of the chip
CERALOCKr with built-in load capacitors.
High-density mounting is made possible by the small
package and the elimination of the need for an external
load capacitor.
Features
1. Oscillation circuits do not require external load capacitors.
2. Available in a wide frequency range.
3. Extremely small and have a low profile.
4. No adjustment is necessary for oscillation circuits.
Applications
1. Clock oscillators for USB (full-speed) controller ICs
2. Audio equipment and musical instruments, etc.
3. Other applications for replacement of Crystal units/
Oscillators
Part Number Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTCR_G15L 4.00 to 7.99 ±0.1 ±0.08 0 to 70
CSTCR_GH5L 4.00 to 7.99 ±0.07 ±0.08 0 to 70
CSTCE_G15L 8.00 to 13.99 ±0.1 ±0.08 0 to 70
CSTCE_GH5L 8.00 to 13.99 ±0.07 ±0.08 0 to 70
CSTCE_V13L 14.00 to 20.00 ±0.1 ±0.08 0 to 70
CSTCE_VH3L 14.00 to 20.00 ±0.07 ±0.08 0 to 70
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
CSTCR_G15L/CSTCR_GH5L
4.00-7.99MHz
CSTCE_G15L/CSTCE_GH5L
8.00-13.99MHz
CSTCE_V13L/CSTCE_VH3L
14.00-20.00MHz
4.5±0.1
4.1 max.
0.4 (ref.)
0.4±0.1 0.4±0.1
0.4±0.1
(3) (2) (1)
0.6±0.05
0.75±0.1 1.5±0.1 1.5±0.1
0.4 (ref.)
0.4 (ref.)
0.2±0.2
0.30±0.20
2.0±0.1
1.1±0.1
1.4 max.
(in mm)
*: EIAJ Monthly
Code
*
3.2±0.15
1.3±0.15
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
3.0 max.
0.10±0.10
0.4±0.1
0.4±0.1 1.2±0.1 1.2±0.1
(1)(2)(3)
0.1±0.1
1.1 max.
0.4±0.1
0.70±0.10
0.4±0.1 0.4±0.1
(in mm)
*
*: EIAJ Monthly
Code
3.2±0.15
0.10±0.10
0.1±0.1
1.3±0.15
1.1 max.
0.4±0.1
0.5 (ref.) 0.5 (ref.)
0.9±0.1
3.0 max.
0.4±0.1
(1)(2)(3)
0.4±0.1 1.2±0.1 1.2±0.1
0.4±0.10.4±0.1
0.5 (ref.)
(in mm)
*: EIAJ Monthly
Code
*
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
3
VDD
Rf To Frequency Counter
5pF
1MΩ
Rd
C1 C2
(1) (3)
(2)
2.6
0.4
1.5 1.5
1.1
0.4 0.41.1
Land Pattern
(in mm)
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
Measuring Circuit of Oscillating Frequency
Standard Land Pattern Dimensions
CSTCR_G15L/CSTCR_GH5L/CSTCE_G15L/
CSTCE_GH5L/CSTCE_V13L/CSTCE_VH3L
CSTCR_G15L/CSTCR_GH5L
(* This Land Pattern is not common to CSTCR_G.)
CSTCE_V13L/CSTCE_VH3L
(* This Land Pattern is not common to CSTCE_V.)
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
CSTCE_G15L/CSTCE_GH5L
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
3
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
Frequency Temperature Characteristics
CSTCR_G15L/CSTCR_GH5L
CSTCE_V13L/CSTCE_VH3L
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+0.2
+0.1
0
-0.1
-0.2
CSTCE_G15L/CSTCE_GH5L
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
3
Application Circuits Utilization
14 13 GND
EVALUATION BOARD
IC : M66291GP
Vset=3.3V
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V1
220Ω
1MΩ
CERALOCKr
C1C2
V2
67LL1
IC : LC87F1964A
Vdd=5.0V
CERALOCKr: CSTCE12M0G15Lpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
HH1
V2V1
470Ω
CERALOCKr
C1C2
H: 8, 19, 39
L: 5, 20, 40
H1: 31, 33
L1: 29, 30, 32, 34~36
10kΩ
10kΩ
H
48 47 GND
EVALUATION BOARD
IC : ISP1181BDGG
Vset=3.3V
CERALOCKr
C1C2
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
M66291GP (Renesas)
LC87F1964A (Sanyo)
ISP1181BDGG (Philips)
MN102HF74GHL (Panasonic)
TUSB2046B (Texas Instruments)
USB Transceiver
8-bit Microcontroller
USB Controller
H82 18
Fout
23 24 L
IC : MN102HF74GHL
Vdd=3.3V
H: 1~17, 22, 25, 26~42, 54, 58~60, 66~81, 83~91
L: 19, 20, 43~53, 55~57, 61~65, 82, 92~100
CERALOCKr
C1C2
CERALOCKr: CSTCE12M0G15Lpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
H
30 29 GND
IC : TUSB2046B
Vcc=3.3V
CERALOCKr
C1C2
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
1MΩ
H: 3, 25
L: 7, 28
16-bit Microcontroller
USB 4-port HUB
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
3
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Standard Frequency Tolerance for Consumer/Industrial Usage
Chip type CERALOCKr with built-in load capacitors
provides an extremely small package.
MURATA's package technology expertise has enabled the
development of the Chip CERALOCKr with built-in
load capacitors.
High-density mounting can be realized because of the
small package and the elimination of the need for an
external load capacitor.
Features
1. Oscillation circuits do not require external load capacitors.
2. Available in a wide frequency range.
3. Extremely small and have a low profile.
4. No adjustment is necessary for oscillation circuits.
Applications
1. Clock oscillators for microprocessors
2. Small electronic equipment such as handheld phone,
digital video camcorder (DVC), digital still camera (DSC),
portable audio player, etc.
3. Storage media and memory (HDD, Optical storage device,
FDD, Flash memory card, etc.)
4. Office automation equipment (Mobile PC, Mouse,
Keyboard, etc.)
5. Audio-visual applications (TV, DVD-HDD recorder, Audio
equipment, Remote control, etc.)
6. Home appliances (Air conditioner, Microwave oven,
Refrigerator, Washing machine, etc.)
CSTCC_G
2.00-3.99MHz
CSTCR_G
4.00-7.99MHz
CSTCE_G/CSTCE_G_Z
8.00-13.99MHz
0.45
(Ref.)
1.2±0.2
6.6 max.
(3) (2) (1)
0.3±0.3 0.5±0.05
2.5±0.1 2.5±0.1
1.1±0.1
7.2±0.2
3.0±0.2
t
0.45±0.3
t : 1.75±0.05
(2.00—2.99MHz)
t : 1.55±0.05
(3.00MHz—)
1.4±0.2 1.2±0.2
0.45
(Ref.) 0.45
(Ref.)
2.1 max.
(in mm)
*
*: EIAJ code
4.5±0.1
4.1 max.
0.8±0.1
0.75±0.1 1.5±0.1 1.5±0.1
0.4±0.1 0.4±0.1 0.4±0.1
0.8±0.1 0.8±0.1
0.4 (ref.)0.4 (ref.)0.4 (ref.)
0.4±0.05
0.2±0.2
0.3±0.2
2.0±0.1
1.4 max.
(2) (1)(3)
1.15±0.05
(in mm)
*
* : EIAJ Monthly
Code
3.2±0.15
1.3±0.15
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
3.0 max.
0.10±0.10
0.4±0.1
0.4±0.1 1.2±0.1 1.2±0.1
(1)(2)(3)
0.1±0.1
1.1 max.
0.4±0.1
0.70±0.10
0.4±0.1 0.4±0.1
(in mm)
*
CSTCE_V
14.00-20.00MHz
3.2±0.15
0.10±0.10
0.1±0.1
1.3±0.15
1.1 max.
0.4±0.1
0.62 (ref.) 0.62 (ref.)
0.9±0.1
3.0 max.
0.6±0.1 0.4±0.1 0.6±0.1
(1)(2)(3)
0.65±0.1 0.95±0.1 0.95±0.1
0.45 (ref.)
(in mm)
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
4
VDD
Rf To Frequency Counter
5pF
1MΩ
Rd
C1 C2
(1) (3)
(2)
Measuring Circuit of Oscillating Frequency
CSTCR_G/CSTCE_G/CSTCE_G_Z/CSTCE_V
Rf
Rd
VDD
C1 C2
To Frequency Counter
(1) (3)
(2)
CSTCC_G
Part Number Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTCC_G 2.00 to 3.99 ±0.5
±0.3 [±0.4%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz]
-20 to 80
CSTCR_G 4.00 to 7.99 ±0.5 ±0.2 -20 to 80
CSTCE_G 8.00 to 13.99 ±0.5 ±0.2 -20 to 80
CSTCE_G_Z 8.00 to 13.99 ±0.5 ±0.2 -40 to 125
CSTCE_V 14.00 to 20.00 ±0.5 ±0.3 -20 to 80
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
3.8~4.4
1.2 1.2
2.5 2.5
1.4 1.2 1.2
Land Pattern
(in mm)
Standard Land Pattern Dimensions
CSTCC_G
2.6
1.6
0.8
0.4
1.5 1.5
0.4 0.4
0.8 0.8
0.70.7
Land Pattern
(in mm)
CSTCR_G
(* This Land Pattern is not common to
CSTCR_G15C, CSTCR_G15L, CSTCR_GH5L.)
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
Land Pattern
0.3 0.30.65 0.30.65
0.95 0.95
1.6
(in mm)
CSTCE_G/CSTCE_G_Z CSTCE_V
(* This Land Pattern is not common to
CSTCE_V13C, CSTCE_V_C, CSTCE_V13L, CSTCE_VH3L.)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
4
Oscillating Frequency Shift (%)
Temperature (°C)
-40 -20 0 +20 +40 +60 +80 +100
+0.2
+0.1
0
-0.1
-0.2
Frequency Temperature Characteristics
CSTCC_G
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+0.2
+0.1
0
-0.1
-0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
CSTCR_G
CSTCE_G/CSTCE_G_Z CSTCE_V
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
4
Application Circuits Utilization
H6
11 10 L12
0.1μF
IC : μPD78F0533GB
Vdd=5.0V
10kΩ
H: 15, 16, 47
L: 9, 13, 14, 48
CERALOCKr
C1C2
CERALOCKr: CSTCR4M00G55-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
H
14 13 LVdd2
1F
IC : MN103SFC2D
Vdd=5.0V
H: 9, 17, 34
L: 7, 15, 36
Vdd2: 16, 38
CERALOCKr
C1C2
CERALOCKr: CSTCR5M00G55Z-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
H
16 15 GND
EVALUATION BOARD
IC : PIC16F716-I/SO(HS)
Vdd=5.0V
CERALOCKr
C1C2
CERALOCKr: CSTCE12M0G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
V2V1
1MΩ
µPD78F0533GB (Renesas) TMP19A43FDXBG (Toshiba)
MN103SFC2D (Panasonic) MB95F128H (Fujitsu)
PIC16F716-I/SO (Microchip) HD64F36077GH (Renesas)
8-bit Microcomputer
32-bit Microcomputer
8-bit Microcomputer
A14 A15 GND
EVALUATION BOARD
IC : TMP19A43FDXBG
Vcc=1.5V
Xin: A14
Xout: A15
CERALOCKr
C1C2
CERALOCKr: CSTCE10M0G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
Vcc'=2.5V Vcc''=3.3V
V2V1
H
56 55 L
IC : MB95F128H
Vcc=5.0V
H: 3, 28, 51, 79
L: 4, 29, 54, 57
CERALOCKr
C
1
C
2
CERALOCKr: CSTCE8M00G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
V2V1
H
11 10 L6
0.1μF
IC : HD64F36077GH
Vcc=5.0V
H: 3, 7, 12
L: 8, 9
CERALOCKr
C1C2
CERALOCKr: CSTCE8M00G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
V2V1
32-bit Microcomputer
8-bit Microcomputer
16-bit Microcomputer
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
4
Application Circuits Utilization
H14
12 13 L10
IC : μPD70F3215HYGC
Vdd=5.0V
H: 1, 5, 9, 34, 70
L: 2, 8, 11, 33, 69
CERALOCKr
C1C2
CERALOCKr: CSTCR5M00G55-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
10μF
H18
15 14 L
IC : ST7FLITE29F2B6
Vdd=5.0V
H: 17
L: 16
CERALOCKr
C1C2
CERALOCKr: CSTCE16M0V53-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
V2V1
µPD70F3215HYGC (Renesas)
ST7FLITE29F2B6 (ST Microelectronics)
ATmega128 (Atmel)
TMS320F2810PBKA (Texas Instruments)
32-bit Microcomputer
8-bit Microcomputer
H
24 23 L
IC : ATmega128
Vcc=5.0V
H: 21, 52, 64
L: 22, 53, 63
CERALOCKr
C1C2
CERALOCKr: CSTCE8M00G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
V2V1
58 57 L
IC : TMS320F2810PBKA
Vdd1=1.8V
CERALOCKr: CSTCE15M0V53-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
Vdd2=3.3V
H1 H2
V2V1
100Ω
CERALOCKr
C1C2
H1: 20, 29, 42, 56, 63, 74, 82, 94, 99,
100, 102, 110, 114
H2: 1, 13, 14, 25, 49, 52, 83, 104, 118
L: 12, 15, 17, 26, 30, 39, 53, 59, 62, 73,
88, 95, 103, 109, 115, 117, 128
8-bit Microcomputer
32-bit Microcomputer
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
4
Ceramic Resonators (CERALOCKr)
MHz Lead Type -Standard Frequency Tolerance for Consumer/Industrial Usage
MURATA's ceramic resonator, CERALOCKr with built-in
load capacitors, has been widely applied as the most
suitable component for clock oscillators in a broad
range of microprocessors.
The CSTLS series can be used in the design of
oscillation circuits not requiring external load
capacitors, enabling both high-density mounting and
cost reduction.
Features
1. Oscillation circuits do not require external load capacitors.
There is some variation in built-in capacitance values
applicable to various IC.
2. Stable over a wide temperature range.
3. Compact, lightweight and exhibit superior shock
resistance performance.
4. Enable the design of oscillator circuits requiring no
adjustment.
5. Cost-effective and reliable availability
Applications
1. DTMF generators
2. Clock oscillators for microcomputers
3. Remote control units
4. Automated office equipment
Part Number Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Frequency Shift by Temperature
(%)
Operating
Temperature Range
(°C)
CSTLS_G 3.40 to 10.00 ±0.5
±0.2 [-0.4% to +0.2%:Built-in Capacitance 47pF type]
-20 to 80
CSTLS_X 16.00 to 70.00 ±0.5 ±0.2 -20 to 80
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
The order quantity should be an integral multiple of the "Minimum Quantity" shown on the packaging page.
CSTLS_G
3.40-10.00MHz
CSTLS_X
16.00-70.00MHz
: Weekly Date Code
(in mm)
8.0±1.0 3.0±1.0
5.5±0.5
3.5±0.3
ø0.48±0.05
2.5±0.2
2.5±0.2
0.7 (Ref.)
7.0 (Ref.)
(3) (2) (1)
***
***
: 3.5±1.0 (16.00—32.99MHz)
3.0±1.0 (33.00—70.00MHz)
*
5.5±1.0
2.5±0.2 2.5±0.2
(in mm)
6.5±0.53.5±0.3ø0.48±0.05
T*1
T*1
(3) (2) (1)
* : EIAJ Monthly Code
Rf
Rd
VDD
C1 C2
To Frequency Counter
(1) (3)
(2)
Measuring Circuit of Oscillating Frequency
32-bit Microcomputer
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
5
Oscillating Frequency Shift (%)
Temperature (°C)
40
+0.50
+0.25
0
–0.25
–0.50
40 80 120
0
Frequency Temperature Characteristics
CSTLS_G
Temperature (°C)
Oscillating Frequency Shift (%)
0.3
0.2
0.1
0.0
0.1
0.2
0.3
–50 –30 –10 10 30 50 70 90 110 130
CSTLS_X
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
5
Application Circuits Utilization
H25
28 29 L
M38235G6HP
Vcc=5.0V
H: 71
L: 30, 73
CERALOCKr
C1C2
CERALOCKr: CSTLS8M00G53-B0
C1=15pF (Typ.)
C2=15pF (Typ.)
V2V1
M38235G6HP (Renesas) LC87F5G32A (Sanyo)
8-bit Microcomputer
26 H' H 2
67LL'
10kF
2.2kF
IC : LC87F5G32A
Vdd=5.0V
10kΩ 10kΩ 100pF
47000pF510Ω
H: 8, 19, 39
L: 5, 20, 40
H': 29, 31, 35
L': 30, 32~34, 36
CERALOCKr
C1C2
CERALOCKr: CSTLS5M00G53-B0
C1=15pF (Typ.)
C2=15pF (Typ.)
V2V1
8-bit Microcomputer
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
5
Notice for Consumer/Industrial Usage -MHz Chip Type
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
1. Soldering
(1) Reflow soldering
Recommendable Flux and Solder
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
(2) Soldering with Iron
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
(3) Solder Volume
Do not reuse components removed from a circuit board
after soldering.
(4) Other
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
(5) Conditions for Placement Machines
150
180
220
245
260
Gradual
Cooling
Peak
Pre-heating
(150 to 180°C)
Heating
(220°C min.)
60 to 120s 30 to 60s
Temperature (°C)
Flux
Solder
Please use rosin based flux,
not water soluble flux.
Recommendable Soldering Profile
Pre-heating
Heating
Peak Temperature
150 to 180°C
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
220°C min.
upper limit: 260°C
lower limit: 245°C
60 to 120s
30 to 60s
1s max.
5s max.
Temperature shall be measured on the surface of component.
Recommendable Soldering with Iron
Heating of the soldering iron
Watt
Shape of the soldering iron
350°C max.
30W max.
ø3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
Soldering Time
Solder
Continued on the following page.
Soldering and Mounting (CSTCC_G Series)
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
Notice for Consumer/Industrial Usage -MHz Chip Type
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to confirm
stable electrical characteristics are maintained.
3. Coating
dT=
<60°C (dT=Component-solvent)
*1 ex. If the component is immersed at +90°C into
cleaning solvent at +60°C, then dT=30°C.
(2) Temperature Difference : dT *1
5 minutes max. by blowing air at +80°C max.
(4) Drying
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
(5) Other
(a) Ultrasonic Wash
1 minute max. in above solvent at +60°C max.
(Frequency: 28kHz, Output: 20W/l)
(b) Immersion Wash
5 minutes max. in above solvent at +60°C max.
(c) Shower or Rinse Wash
5 minutes max. in above solvent at +60°C max.
(3) Conditions
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
2. Wash
(1) Cleaning Solvents
Some series do not withstand washing.
Please check the list at right before use. CSTCC (2.00 to 3.49MHz)
CSTCC (3.50 to 3.99MHz)
Series Wash
Not Available
Available
Continued from the preceding page.
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
29
Notice for Consumer/Industrial Usage -MHz Chip Type
Storage and Operating Conditions
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
30
Notice for Consumer/Industrial Usage -MHz Chip Type
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
1. Soldering
Conformal coating or washing of the component is not
acceptable, because it is not hermetically sealed.
Please contact us if you need a washable component.
2. Washing / Coating
(1) Reflow soldering
Recommendable Flux and Solder
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
(2) Soldering with Iron
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
(3) Solder Volume
Do not reuse components removed from a circuit board
after soldering.
(4) Other
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
(5) Conditions for Placement Machines
150
180
220
245
260
Gradual
Cooling
Peak
Pre-heating
(150 to 180°C)
Heating
(220°C min.)
60 to 120s 30 to 60s
Temperature (°C)
Flux
Solder
Please use rosin based flux,
not water soluble flux.
Recommendable Soldering Profile
Pre-heating
Heating
Peak Temperature
150 to 180°C
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
220°C min.
upper limit: 260°C
lower limit: 245°C
60 to 120s
30 to 60s
1s max.
5s max.
Temperature shall be measured on the surface of component.
Recommendable Soldering with Iron
Heating of the soldering iron
Watt
Shape of the soldering iron
350°C max.
30W max.
ø3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
Soldering Time
Solder
Soldering and Mounting (CSTCR_G/G15L/GH5L, CSTCE_G/G15L/GH5L, CSTCE_V/V13L/VH3L Series)
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
31
Notice for Consumer/Industrial Usage -MHz Chip Type
Storage and Operating Conditions
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
Notice for Consumer/Industrial Usage -MHz Lead Type
The component cannot withstand washing.
Please do not apply excessive mechanical stress to the
component and lead terminals during soldering.
Storage and Operating Conditions
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Soldering and Mounting (CSTLS_G, CSTLS_X Series)
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
33
Packaging for Consumer/Industrial Usage -MHz Chip Type
(in mm)
ab
CSTCC_G
CSTCR_G
CSTCR_G15L
CSTCR_GH5L
CSTCE_G
CSTCE_G15L
CSTCE_GH5L
CSTCE_V
CSTCE_V13L
CSTCE_VH3L
Part Number Plastic Tape ø180mm Plastic Tape ø330mm Bulk Reel Dimensions
2,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
6,000
9,000
9,000
9,000
9,000
9,000
9,000
9,000
9,000
9,000
500
500
500
500
500
500
500
500
500
500
a
a
a
a
b
b
b
b
b
b
(ø180 )
17.0±1.0
ø13.0±0.2 2.0±0.5
160-190
Trailer Leader
Empty
400-560
Cover Film
Components
Trailer
160-190
Empty
160 min.
Empty
160 min.
400-560
Cover Film
Leader
Empty Components
ø13.0±0.2 2.0±0.5
+1.0
–0
9.0
13.0±1.0
(pcs.)
Dimensions of Reel
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
13.0
+1.0
0
0
–1.5
(ø180 )
0
–1.5
Minimum Quantity
(in mm)
4.0±0.1
2.0±0.05
(9.5)
4.0±0.1
ø1.5+0.1
-0
ø1.5+0.1
-0
12.0±0.2
5.5±0.05
1.75±0.1
0.3±0.05
1.25±0.05
(1.85 max.)
2.2±0.1
Direction of Feed
(3°)
10° Cover Film
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(3)(2)(1)
4.7±0.1
Dimensions of Taping
CSTCR_G15L/CSTCR_GH5L
(in mm)
2.0±0.05
4.0±0.1
(3˚)
3.5±0.05
8.0±0.2
1.75±0.1
0.25±0.05
0.90±0.10
(1.30 max.)
10°
(5.2)
Cover Film
Direction of Feed
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
4.0±0.1
ø1.5 -0.0
+0.1
ø1.0 -0.0
+0.2
1.50 -0.05
+0.10
(3)(2)(1)
3.40 -0.05
+0.10
CSTCE_G15L/CSTCE_GH5L
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
34
Packaging for Consumer/Industrial Usage -MHz Chip Type
(in mm)
4.0±0.1
2.0±0.05
(9.5)
4.0±0.1
(3)(2)(1)
ø1.5+0.1
-0
ø1.5+0.1
-0
12.0±0.2
5.5±0.05
1.75±0.1
4.7±0.1
2.2±0.1
Direction of Feed
(3°)
10° Cover Film
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
0.3±0.05
1.25±0.05
(1.85 max.)
Dimensions of Carrier Tape
(in mm)
4.0±0.1
Cover Film
4.0±0.1
2.0±0.05
8.0±0.2
ø1.5
+0.1
-0.0
ø1.0
+0.1
-0.0 +0.10
-0.05
3.5±0.05
1.75±0.1
3.45±0.1
Direction of Feed
0.25±0.05
(1.40 max.)
1.10±0.05
(3°)
1.50
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
10°
(5.2)
(2)(3) (1)
Dimensions of Taping
CSTCR_G
CSTCE_V
Dimensions of Carrier Tape
(in mm)
4.0±0.1
Cover Film
4.0±0.1
2.0±0.05
8.0±0.2
ø1.5
+0.1
-0.0
ø1.0
+0.1
-0.0 +0.10
-0.05
3.5±0.05
1.75±0.1
3.45±0.1
Direction of Feed
0.25±0.05
(1.40 max.)
1.10±0.05
(3°)
1.50
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
10°
(5.2)
(2)(3) (1)
(in mm)
4.0±0.1
2.0±0.05
+0.3
-0.0
ø1.55±0.05
ø1.5
1.75±0.1
5.5±0.05
12.0±0.2
7.6±0.1
4.0±0.1
(9.5)
3.3±0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10° (3°)
t1 *1
t2 *2
0.3±0.05
Direction of Feed
(3) (1)
Frequency Range
Dimensions vary with frequency range of CERALOCKr.
2.00–2.99MHz 3.00–3.99MHz
1.85±0.05
2.45 max. 1.65±0.05
2.25 max.
(2)
t1
t2
*1, *2:
*1
*2
(in mm)
2.0±0.05
4.0±0.1
(3˚)
3.5±0.05
8.0±0.2
1.75±0.1
0.25±0.05
0.90±0.10
(1.30 max.)
10°
(5.2)
Cover Film
Direction of Feed
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
4.0±0.1
ø1.5 -0.0
+0.1
ø1.0 -0.0
+0.2
1.50 -0.05
+0.10
(3)(2)(1)
3.40 -0.05
+0.10
CSTCE_V13L/CSTCE_VH3L CSTCC_G
CSTCE_G
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
35
Packaging for Consumer/Industrial Usage -MHz Lead Type
Part Number Ammo Pack
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Bulk
500
500
CSTLS_G (3.40 to 10.0MHz) 2,000
CSTLS_X (16.00 to 70.00MHz) 2,000
(in mm)
Width of diameter
Height of resonator
Dimensions of terminal
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole
Length from sprocket hole center to lead
Length from sprocket hole center to
component center
Lead spacing (I)
Lead spacing (II)
Slant forward or backward
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of
sprocket hole and lead stopper
Total height of resonator
Diameter of sprocket hole
Total tape thickness
Body tilt
Item Code Dimensions Tolerance Remarks
D
A
d
L1
P
P0
P1
P2
F1
F2
dh
W
W0
W1
W2
H0
H1
D0
t
dS
8.0
5.5
ø0.48
5.0 min.
12.7
12.7
3.85
6.35
2.5
2.5
0
18.0
6.0 min.
9.0
0
18.0
23.5
ø4.0
0.6
0
±1.0
±0.5
±0.05
±0.5
±0.2
±0.5
±0.5
±0.2
±0.2
±1.0
±0.5
±0.5
±0.5
±1.0
±0.2
±0.2
±1.0
Tolerance for Pitches 10xP0=127±1
1mm max.
Hold down tape does not exceed the carrier tape.
+0.5
−0
M M
P2
D
A
P
dS
W
H0
H1
W1
W0
L1
W2
D0
t
P0
P1F1F2
Direction of Feed
dh dh
d
* *****
Minimum Quantity
Tape Dimensions of CSTLS_G
Continued on the following page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
36
Packaging for Consumer/Industrial Usage -MHz Lead Type
Tape Dimensions of CSTLS_X
(in mm)
Width of diameter
Height of resonator
Dimensions of terminal
Lead length under the hold down tape
Pitch of component
Pitch of sprocket hole
Length from sprocket hole center to lead
Length from sprocket hole center to
component center
Lead spacing (I)
Lead spacing (II)
Slant forward or backward
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of
sprocket hole and lead stopper
Total height of resonator
Diameter of sprocket hole
Total tape thickness
Body tilt
Item Code Dimensions Tolerance Remarks
D
A
d
L1
P
P0
P1
P2
F1
F2
dh
W
W0
W1
W2
H0
H1
D0
t
dS
5.5
6.5
ø0.48
5.0 min.
12.7
12.7
3.85
6.35
2.5
2.5
0
18.0
6.0 min.
9.0
0
18.0
24.5
ø4.0
0.6
0
±1.0
±0.5
±0.05
±0.5
±0.2
±0.5
±0.5
±0.2
±0.2
±1.0
±0.5
±0.5
±0.5
±1.0
±0.2
±0.2
±1.0
Tolerance for Pitches 10xP0=127±1
1mm max.
Hold down tape does not exceed the carrier tape.
+
0.5
0.0
D dS
d
P2P
A
W0
L1
W1
W2
H0
H1
P1
P0t
F1F2
W
D0
dh dh
Direction of Feed
Continued from the preceding page.
P16E.pdf
Apr.25,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
37
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircraft equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Traffi c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
March 2017. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the eff ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the eff ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
Cat. No. P16E-26
P16E.pdf
Apr.25,2017

Products

CERAMIC RES 4.0000MHZ 15PF SMD
Available Quantity11324
Unit Price0.32
CERAMIC RES 4.0000MHZ 15PF SMD
Available Quantity15155
Unit Price0.36
CERAMIC RES 2.4570MHZ 47PF SMD
Available Quantity13416
Unit Price0.56
CERAMIC RES 4.0000MHZ 15PF T/H
Available Quantity3286
Unit Price0.19
CERAMIC RES 5.0000MHZ 15PF SMD
Available Quantity7142
Unit Price0.32
CERAMIC RES 6.0000MHZ 15PF SMD
Available Quantity8379
Unit Price0.32
CERAMIC RES 4.1900MHZ 15PF SMD
Available Quantity4052
Unit Price0.32
CERAMIC RES 6.0000MHZ 39PF SMD
Available Quantity5228
Unit Price0.32
CERAMIC RES 6.0000MHZ 15PF SMD
Available Quantity8869
Unit Price0.36
CERAMIC RES 4.0000MHZ 15PF T/H
Available Quantity1732
Unit Price0.16
CERAMIC RES 8.0000MHZ 15PF T/H
Available Quantity6513
Unit Price0.17
CERAMIC RES 6.0000MHZ 15PF T/H
Available Quantity2584
Unit Price0.17
CERAMIC RES 7.3700MHZ 15PF SMD
Available Quantity3653
Unit Price0.38
CERAMIC RES 10.0000MHZ 15PF T/H
Available Quantity2449
Unit Price0.18
CERAMIC RES 4.0000MHZ 39PF SMD
Available Quantity4867
Unit Price0.39
CERAMIC RES 7.3700MHZ 15PF T/H
Available Quantity1157
Unit Price0.19
CERAMIC RES 3.5800MHZ 47PF SMD
Available Quantity2226
Unit Price0.5
CERAMIC RES 20.0000MHZ 15PF T/H
Available Quantity2470
Unit Price0.36
CERAMIC RES 4.0000MHZ 47PF T/H
Available Quantity6566
Unit Price0.19
CERAMIC RES 8.0000MHZ 47PF T/H
Available Quantity3215
Unit Price0.19